|
|
Conflicting edits
© lifeboy
Firstly:
Somebody said:
DILUTION: To prepare SC for patients, dilute it with distilled or pure water. Those who sell SC for health purposes usually sell it as a 28% solution. To make a 28% solution from 80% SC, use this formula: 10g 80%SC +18.5g water = 28.5g 28%SC 20g 80%SC + 37g water = 57g 28%SC 40g 80%SC +74g water = 114g 28%SC ... SIMPLIFY: An easier formula to use is 1 part 80%SC and 2 parts water. This makes a 27% solution, which is close enough to 28% that the effect is practically the same.
Then at the bottom:
Somebody said:
Here's the calculation: 100%SC density =~ 2.5g/cc (See http://www.atsdr.cdc.gov/toxprofiles/tp160-c4.pdf) 80%SC density: (= 2.2g/cc as follows:) 4gSC + 1gW = 5g80%SC; 4gSC(2.5g/cc) +1gW(1g/cc) = 11g^2/cc/5g80%SC = 2.2g/cc; 1cc80%SC = 2.2g80%SC; 1ccW = 1gW; 1cc80%SC + 6ccW = 2.2g80%SC + 6gW = 7cc27%SC Solution; - So, when you make SC Solution, add 6 parts Water to your dry 80%SC to get a 27%SC Solution. - Since there will be some air in the SC flakes, it may actually be close to 25%SC Solution. But that's not a problem. Jim Humble first cured his friend in Mexico of malaria with a mere 5%SC Solution. So exact percentage amounts aren't important.
However, the last one is wrong. (And the fomulations very difficult to read). I can't remove it however, so someone should clean this up please.
|